Custom Line 2010
Dellinger CL10 MF Trans.Black, Trans.Blue, Trans.Orange

June.2010 on Sale

Caparison Custom Line...We make it in the small lot number.
For example, rare material model, graphic model and special structure model.
The meaning of Custom Line is not the acceptance of the special order.

Custom Line 2010...We knew that there were many voices which hoped for the guitar of Bolt-on Neck/ Flame Maple Top.
But, an answer to the sound of Flame Maple Body didn't have us. We examined that method.
We made the structure that the Flame Maple material was used for the 2009 with "TAT Special" model.
I applied that structure, and did the trial to make Dellinger model and Horus model. That is Custom Line to announce this time.
The characteristics of these models are the combinations of the material of Mahognay-Maple-Mahogany in Body Back.
The structure to connect the Maple material of the center of Body and the Maple material of Neck by using Bolt.
The earliness of the start of the sound and the outline of the low range was secured by this.
The thickness of the Flame Maple material of Top is about 16mm.
Output the characteristic sound of the mid range in the Flame Maple material by this Body structure.

Custom Line2010Dellinger II CL10 MF Page　Horus CL10 MF Page


Trans.Blue




Trans.Black


Trans.Orange

Flame Maple Top Head


Heel


Body Structure
Dellinger CL10 MF...The Maple Fingerboard(MF) with Dellinger model is the first appearance.
The Rotary Switch Mode was installed for the control. Wide sound can be chosen by this.
(The Rotary Switch Mode by the SSH Pickup layout was installed on this model for the first time.)
PH-bc of the straight and the high power sound with Bridge Pickup was installed.

Rotary Switch Mode
The wide range of sound variation when made in the rotary switch mode.
3 Way Lever Switch becomes rotary switch mode when used in the middle position
that can also generate a variety of sounds from 4 Way Rotary Switch selection.


Position Alignments
1.Neck Pickup+Bridge Pickup Split Coil(inside)
2.Center Pickup+Bridge Pickup Split Coil(inside)
3.Center Pickup+Neck Pickup
4.Center Pickup



Dellinger CL10 MF...Trans.Black, Trans.Blue, Trans.Orange with Hard Case
Specifications
Neck Joint: Bolt-on

HEAD
Head Stock: Devil's Tail with "Dellinger" Logo/White Binding
Head Top: Flame Maple
Head Angle: 15 degrees
Machine Heads:  Gotoh SG381-07 H.A.P
NECK
Neck Material: Maple/Oiled Finish
Neck Grip: Caparison
Fingerboard Material: Maple
Neck Scale:  648mm (25 1/2 inch.)
Nut Width: 42mm
No. of Frets: 24 Frets
Frets: Jumbo
Nut: Schaller R2, 42mm
Position Inlay: Clock
BODY
Body Shape:  Dellinger
Body Material: Top-Flame Maple, Back-Mahogany+Maple+Mahogany
Bridge:  Schaller S-FRT II

ELECTRONICS
PICKUP
Neck Position: Caparison VS-IA
Center Position: Caparison VS-IA
Bridge Position: Caparison PH-bc
Controls: Master Volume(CTS), 3Way Lever Switch, 4 Way Rotary Switch
FINISH
Head Top: Same as Body Color(Gloss)
Body Finish: Trans.Black, Trans.Blue, Trans.Orange(Gloss)

Hardware Color: Schaller-Black, Gotoh-Cosmo Black
Tuning
Regular

OTHERS
Strings: Dean Markley NickelSteel (.009-.042)
Accessories: Hard Case(CAG-1), Adjustable Wrench




2010 kanno